- Contact：Mr. Song
- Phone：0086-13705113637
- Tell：0086-0515-88809180
- Fax：0086-0515-88809181
- E-mail：jsjckt@126.com
- Address：No. 18, Rongguang Road, National High-tech Park, Yancheng City, Jiangsu Province
Industrial air conditioners are mainly installed in factories and production workshops of all walks of life, which can not only make the factory temperature reach a comfortable environment, but also improve air quality, odor, dust and flying hair. In the process of using industrial air conditioners, there will be problems such as small air volume, no refrigeration, and odors in the outlet. How should we deal with these problems?
Industrial air conditioningg maintenance methods:
Open the suction grille, hold the two buttons, and slowly pull down, drag the hook on the air filter to pull out, remove the filter, cleaning method: remove dust with a vacuum cleaner, or clean with water or warm water, dust too much with a soft brush plus neutral detergent, wash the water off, and then put it in the shade to dry. Remember not to use hot water above 50℃ to clean, so as not to fade or deformation; Do not dry on fire, filter may catch fire, air filter must be installed after cleaning. The air filter is hung on the protruding part of the upper part of the suction grille, and then fixed on the suction grille; Slide the convex handle on the back of the suction grille inward, install the air filter on the suction grille, close the suction grille, contrary to step 1, press the filter signal reset key on the control panel, the central air conditioning cleaning reminder sign will disappear. If the use of ambient dust is too much, the air filter should be cleaned about once a year.
The commonly used physical cleaning method of industrial air conditioning has the main engine through the gun, that is, through the compressed air or manual punching rod, rubber plug, nylon brush or round steel and other tools through the heat exchanger tube to remove the accumulation or infarction in the tube. Open the main engine end cover, use the gun to open the copper pipe one by one, clean the biological mud and rust residue on the pipe wall, and rinse with high pressure water at the end of the gun. Then the side of the water chamber, the end cover of the inner wall of all rust residue, scale block completely eradicated, and brush twice anti-rust paint, play the role of rust, rust, scale, scale.
Industrial air conditioning, chemical fiber industrial air conditioning, chemical fiber industry refrigeration ,textile industrial air conditioning , dust-free workshop cooling, ventilation pipeline, cooling tower, freezer and other air conditioning units and accessories.
Jiangsu Jincheng Air Conditioning Engineering Co., Ltd. is a comprehensive manufacturer of special air-conditioning equipment design, production, installation, and commissioning of clean room, electricity, tobacco, civil air defense engineering, medical clean room, clean room, electricity, tobacco, civil air defense engineering, medical clean room. Mainly produce JCZK combined air conditioning unit, cooling tower, glass steel ventilated galvanized sheet pipe, stainless steel pipe, polyurethane ventilation pipe and air conditioning accessories, Jincheng air conditioner is wide, the type, the unique model, superior performance, and user Favused.
